Label Sticker, Labeler, Labeling Machine For Tinplat can

Performance characteristics:

1. This machine is suitable for can labeling. After the cans are rolled into the machine, they are driven by the belt pressed on the cans. When the cans pass through the hot-melt glue station, the cans are coated with hot-melt glue. As the cans move forward, the glue on the cans is pressed against the label. The label is glued up on the front end of the can and it starts to be rolled on the can. At the same time, the glue application mechanism at the end of the label also coats the end of the label with glue. As the cans continue to move forward, labels are rolled onto the cans. The belt is then rolled out of the machine.

2. The machine has an alternate bid supply mechanism, so there is no need to stop the machine when adding standards.

3. The glue supply at the end is controlled by the cans, there are cans for glue, and no cans will not supply glue.

4. The machine adopts frequency conversion speed regulation, which can be adjusted at any time according to production needs.

5. The machine is simple to replace the tank type, with few replacement parts, only has glue at both ends of the label, the amount of glue is small, and the labeling cost is low.

Technical parameters:

Labeling capacity: 200-400 cans/minute (varies with different can sizes)

Suitable can size: diameter Φ40—120mm

Suitable for canned food height: 120mm

Label size: width 23-254mm; length 117-380mm

Adhesive for labeling: hot melt glue + quick-drying glue

Power supply: three-phase; 380V (or customized as required)

Electric power: 3Kw

Compressed air: 2-4Kg/m2; 10L/min

Dimensions: length 1856mm × width 750mm × height 1250mm

Weight: 750Kg

Application:

1. This machine is a tinplate can labeling machine, suitable for tinplate can product labeling and round can labeling

2. It can quickly change the specifications of tinplate cans of different sizes, simple operation, neat, beautiful, clean, and easy to clean.